SCR3310v2.0 USB Smart Card Reader. Part No: 905331. Identiv's SCR3310v2.0 is a small and ergonomic USB smart card reader with backside mounting holes. If you observe the usb traffic in a program such as wireshark, you'll see that the previous answers don't cause the device to be re-enumerated, but simply restart the device driver. Restarting the hub goes a little deeper in the usb tree of the kernel and forces the device to completely re-enumerate. When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.

-->

To get a list of the connected USB devices on the USB Host port, use the command lsusb. # lsusb Bus 001 Device 004: ID 0781:5530 SanDisk Corp. Cruzer Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub. All current software, firmware, and drivers for the Surface Pro 3; including optional WinTab drivers. Links to drivers for other Surface devices are in the Details section below. 04 Microsoft® OLE DB Driver 18 for SQL Server® This page is no longer maintained.

This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.

Original product version: Windows 10, version 1703
Original KB number: 4021854

Symptom

When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.

Cause

This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.

StandardDrivers Standard Microsystems USB Devices

This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.

Resolution

To fix this issue, use one of the following methods.

Method 1

Standard Microsystems Corp

To resolve this issue, install update 4022716.

Method 2

Drivers Standard Microsystems USB Devices

If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.

Method 3

If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.

Note

See the device manufacturer's user guide for specific instructions about how to install the driver.

Drivers Standard Microsystems Usb Devices Pc Camera

Method 4

Devices

If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:

  1. Install the device-specific driver (see Method 2).
  2. Open Device Manager.
  3. Right-click (or tap and hold) the name of the device, and then select Uninstall.
  4. Restart the computer.

Standard Microsystems Corporation

When it restarts, Windows will try to reinstall the device by using the device-specific driver.