Improvements and fixes

This update includes a fix for an incorrect device driver (“Microsoft – WPD – 2/22/2016 12:00:00 AM - 5.2.5326.4762”) that was released by a third-party on March 8, 2017 that affected a small group of users with USB connected phones or other media devices that rely on Media Transfer Protocol (MTP). If the driver is on your system, when any of these devices are connected, Windows will try to install this driver. These devices will not be connected until the driver is removed. This incorrect driver was removed from Windows Update the same day, but it may have been downloaded to your computer. After installing this update the incorrect driver will be removed.

Click Start and type 'troubleshoot' then select the first result. Scroll down and choose Hardware and Devices. Run the troubleshooter to see if it detects and installs the USB controllers. Otherwise, see if you can find them in Device Manager. USB Composite and related drivers. Quectel HighSpeed USB Composite Device Driver 5.0.1.3 for Windows 10 Creators Update 64-bit 118 downloads. Motherboard Other. Windows 10 64 bit. Mar 4th 2018, 22:54 GMT. Quectel HighSpeed USB Composite Device Driver 5.0.1.3 for Windows. Dec 19, 2019 The operating system detects the device and loads the standard USB audio 2.0 driver (usbaudio2.sys). Windows then downloads the device-specific driver from Windows Update. The downloaded device driver replaces the usbaudio2.sys driver. In this scenario, the device cannot be used, and the computer does not have sound. Check Device Manager to see if the Apple Mobile Device USB driver is installed. Follow these steps to open Device Manager: Press the Windows and R key on your keyboard to open the Run command. In the Run window, enter devmgmt.msc, then click OK. Device Manager should open. Locate and expand the Universal Serial Bus controllers section.

How to get this update

This update will be downloaded and installed automatically from Windows Update. To get the stand-alone package for this update, go to the Microsoft Update Catalog website.

If you are not able to connect your phone or media device via USB and are not running one of these Windows versions, you can still remove this driver using the process described here:

The new Intel Android* USB Driver package 1. 10.0 that supports Windows* 10 is available for download at the Intel Developer Zone. It enables you to connect your Windows*-based machine to your Android* device that contains an Intel® Atom™ processor inside. This includes the latest Intel® Atom™ x3 and x5 processor families (SoFIA devices are not supported in this version) and supported host systems with Windows* 10 (32/64-bit) and Android devices including those with Android* 5.x – Lollipop.

USB drivers for Android devices are platform-specific, and there is no guarantee that this Intel USB driver will work for every OEM device. Since most OEMs develop the USB driver for all devices that they sell, we recommend that you also check out the Android* OEM USB driver page that lists the OEM drivers.

This installation instructions document will guide you through installing the Intel® Android* USB Driver package which will enable you to connect your Windows* based machine to your Android device that contains an Intel® Atom™ processor inside.

Supported USB profiles

After installing the USB driver package, plug in your Android* device to your computer using your micro-USB to USB cable. The following are the supported USB profiles via the Intel Android USB Driver package:

  • ADB (Android Debug Bridge): This is the debug interface of Android. It is mandatory to use in order to re-flash, and debug.
  • MTP (Media Transfer Protocol): This is the Windows* protocol to facilitate the transfer of media files.
  • PTP (Picture Transfer Protocol): This is the Windows* protocol to allow the transfer of images from digital cameras to computers.
  • RNDIS: This provides a virtual Ethernet link using phone network.
  • CDC Serial (Modem AT Proxy): This provides the link to Modem to allow to use AT commands through a virtual com port.
Devices

Troubleshooting Errors

Kinds Of Usb Devices

Device is not recognized at all

These drivers are only for Intel® devices. If you’re using a device from one of our OEM, please get the drivers directly from their web site, or you can use this list of drivers on the Android* site.

Errors in the Windows* Device Manager

WWL

Open Windows Device Manager:

  • If USB Mass Storage is visible instead of ADB Device, then right click on the Mass Storage device icon and select ‘Uninstall’.
    Then unplug your device from the computer and install drivers’ setup again.
  • If Android Device is visible with a yellow warning icon, then right click on the Android Device icon and select ‘Uninstall’.
    Then unplug your device from the computer and install drivers’ setup again.
Wwl

Drivers Wwl Usb Devices Wireless Adapter

WWLAdapter

Examples Of Usb Devices

Portable Device that has no 'USB debugging' option

There may not be an enabled “USB Debugging” option. The developer options on a phone are hidden by default. Open the settings on a phone, and find the About section. Look through it until the 'Build number' entry is visible. Tap if five times in quick succession, and there should be a small dialog stating it’s now set to developer. Come back to Settings main menu and go into Developer Options, then enable USB Debugging.

Drivers WWL USB Devices

Windows XP: When I activate MTP there is no pop-up to allow me to access phone file system or transfer media files.

Drivers Wwl Usb Devices Wireless Adapter

MTP is not supported by default with Windows XP. You have to install Windows Media Player 10 or later.