- Terratec 1394 Driver Download For Windows 10 64-bit
- Terratec 1394 Driver Download For Windows 10 32-bit
- Terratec 1394 Driver Download For Windows 10 Windows 10
- Terratec 1394 Driver Download For Windows 10 Free
- Terratec 1394 Driver Download For Windows 10
- For Windows 10 and Windows 8 you will need to download the Legacy IEEE 1394 Firewire driver from below in the section marked The Fix for Windows 10 and Windows 8. Here we will show you step by step instructions, along with screen shots on downloading, installing and setting up the Firewire Drives.
- Dec 23, 2017 Installing Fireware 1394 driver for 1394 Firewire card in Windows 10. Install a VIA IEEE 1394 Firewire card into a PCI-E slot in an ASUS Motherboard - Duration: 7:50. I was able to load the legacy drivers following the above instructions. So you guys are super helpful.
This article describes an issue that occurs when you use a FireWire port-based device in Windows 8.1 or Windows 8. Additional steps of configuration is required to enable this update after the installation.
Select your Windows 10 edition and release, and then click on the Download button below. Save the Restore1394OHCICompliantHostControllerWindows10.bat file to any folder on your hard drive. Download Terratec TV-tuner drivers or install DriverPack Solution software for driver scan and update. Windows XP, 7, 8, 8.1, 10 (x64, x86) Category: TV-tuners. It is a out of the experience for MAC and Windows user. The card is in a small square box, provided with a noble aluminium surface and extensive connectivity. Another highlight is the possibility to adjust the volume by a precious control wheel and not by simple buttons. The TERRATEC Xear audio software panel makes it special.
Assume that you have a computer that equips with an IEEE 1394 FireWire controller card. After you upgrade the computer from Windows 7 to Windows 8.1 or Windows 8, devices that connect to the computer by using a FireWire port do not work.
Terratec 1394 Driver Download For Windows 10 64-bit
This issue occurs because the legacy 1394 bus drivers (1394bus.sys and Ochi1394.sys) are removed in Windows 8.1 or Windows 8.
How to obtain this update
Microsoft Download Center
The following files are available for download from the Microsoft Download Center:
All supported x86-based versions of Windows 8.1 or of Windows 8
All supported x64-based versions of Windows 8.1 or of Windows 8
For more information about how to download Microsoft support files, click the following article number to view the article in the Microsoft Knowledge Base:
119591 How to obtain Microsoft support files from online services Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help prevent any unauthorized changes to the file.
Additional steps of configuration requirement
After you install the 1394 OHCI Legacy Driver.msi file, follow these steps:
Right-click the Legacy1394.inf file under one of the following paths based on the computer's architecture:
C:Program Files1394 OHCI Compliant Host Controller (Legacy)x86_driver
C:Program Files1394 OHCI Compliant Host Controller (Legacy)x64_driver
Open Device Manager in Control Panel.
Expand IEEE 1394 Bus host controllers, and then locate the host controller.
Right-click the host controller, and then click Update Driver Software.
The screen shot of the host controller and the Update Driver Software is listed in the following example:
Click Browse my computer for driver software.
Click Let me pick from a list of device drivers on my computer.
Click Generic1394 OHCI compliant host controller (Legacy), and then click the Next button.
Click the Close button.
There are no prerequisites for installing this update.
To apply this update, you do not have to make any changes to the registry.
You have to restart the computer after you apply this update.
Update replacement information
This update does not replace a previously released update.
The global version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.
Windows 8.1 and Windows 8 file information notesThe MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are not listed
For all supported x86-based versions of Windows 8.1 or of Windows 8
For all supported x86-based versions of Windows 8.1 or of Windows 8
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the 'Applies to' section.
Steps of uninstalling the 1394 OHCI Legacy Driver.msi file
Open Control Panel in the Category view.
Click Uninstall a program in Control Panel.
Right-click 1394 OHCI Compliant Host Controller (Legacy), and then click Uninstall.
The screen shot of uninstalling the 1394 OHCI Compliant Host Controller (Legacy) is listed in the following example:
Additional package information
This driver is only intended to work with legacy 1394 host controllers. Therefore, you may experience lower transfer data rates than the 1394b driver.
The driver is intended to resolve compatibility issues for 1394 peripherals on 1394b systems. If you are not experiencing these issues, you should continue to use inbox drivers that are provided in Windows 8.1 or Windows 8.
You have to reinstall this stand-alone driver package if you upgrade to a newer operating system version in the future.
For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:
824684 Description of the standard terminology that is used to describe Microsoft software updates
Info:Model: TerraTec Grabster AV 300 Drivers
Terratec 1394 Driver Download For Windows 10 32-bit
Operating system: Windows XP, Windows Vista, Windows 7, Windows 8
Bits: 32-bit (x86), 64-bit (x64)
Driver Date: 2011-02-23
Size: 2.9 mb
Driver descriptionDownload driver TerraTec Grabster AV 300 Drivers version 22.214.171.124 for Windows XP, Windows Vista, Windows 7, Windows 8 32-bit (x86), 64-bit (x64).
GRABSTER_AV_300_MX_Driver_Setup_126.96.36.199_XP_Vista_7_8.exe - Auto install, Windows XP/Vista/7/8 32 bits (4.2 mb) v.188.8.131.52
Terratec 1394 Driver Download For Windows 10 Windows 10
Grabster_AV_300_MX_Drv_Setup_184.108.40.206_Vista_7_8_64Bit.exe - Auto install, Windows Vista/7/8 64 bits (2.9 mb) v.220.127.116.11
Terratec 1394 Driver Download For Windows 10 Free
TerraTec-18.104.22.168.zip - manual install (1 mb) v.22.214.171.124