NEW! Certified Windows Drivers!

For Windows XP, Windows Vista, and Windows 7!
Both 32 and 64 bit versions!

Timewave’s customers swear by their DSP filters and PK-232 owners love the flexibility and reliability of the most popular data controller ever built. Now with the addition of a USB serial interface, the PK-232/USB rolls it all into one! The PK-232/USB brings a new level of performance to the legendary PK-232 with sharp, accurate DSP filters for all its internal data modes and dual transformer isolation for sound card data modes. Weak signals magically appear from the noise and QRM bounces off the new DSP filters for cleaner copy with fewer errors than the old analog filters.

More Filters, Better Filters, Automatic selection

The PK-232/USB brickwall filters have tighter bandwidth and steeper skirts for improved noise and QRM rejection. New PK-232 firmware (Ver. 7.2) allows a wider selection of filters than the original PK-232, so the filter can match the mode. The correct DSP filter is automatically selected when you choose an internal mode. In RTTY, Timewave’s proven Twin Peak Filters pluck the mark and space tones from the noise and QRM for great copy. In PACTOR, the filter bandwidth automatically changes when the baud rate shifts in response to the error rate of the link. In Morse (CW), the operator can preset either 100 Hz or 200 Hz bandwidth. The PK-232/USB is compatible with all Windows W2K,XP,Vista/Win7 software terminal programs for the PK-232.

Software controlled and mode independent

The sound card mode is software controlled. For example, when operating with PK-TERM’99 (ROC), changing to PSK31 from Pactor is a simple menu click. To run programs like PSK31, SSTV, MT63, Hellschreiber and MFSK16, as well as new, yet-to-be invented modes, just run Timewave’s ModeSwitch® program or enter a few short keyboard commands prior to executing the sound card application.

All the Proven Modes + All the Sound Card Modes

The PK-232/USB supports all the new sound card modes in addition to all of the existing PK-232 modes - Pactor, VHF/HF Packet, AMTOR/SITOR, Baudot, ASCII, Morse, HF Weather FAX, TDM, and NAVTEX. The PK-232/USB comes with a complete cable and connector set, in addition to Timewave’s on-line and telephone support.

Specifications - DSP
DSP Filters, demodulator16 bit Analog Devices 2104 with 16 bit A/D-D/A for Optimum filters for each mode, limiter, 4-pole discriminator, 5-pole post-detection low-pass filter
Modulator Phase continuous sinewave, AFSK generator
Modulator output level 5-200 mV RMS
Processor system Zilog Z-80, ADSP2104
RAM 32K Lithium battery-backed
ROM 128K
Hardware HDLC Zilog 85C30 SCC
Power requirements +12 to +16 VDC @ 590 mA (700 mA. recommended)

Input/Output Connections

Radio interface Two 5-pin connectors, front panel selectable
Direct FSK outputs Normal/Reverse
Scope outputs Mark, space
CW keying outputs +100 VDC @ 200 mA max and –25 VDC @ 30 mA max
Terminal interface Certified USB 2.0 driver included. USB 'mini-B' connector.
Terminal data rates Settings at 300, 600, 1200, 2400, 4800, & 9600 bps
Sound card interface 5-pin connector, dual transformer isolation

Physical

Dimensions 11' (279mm)W x 8.25' (210mm)D x 2.5' (64mm)H
Weight 3 lbs (1.35 kg)

Features

  • Digital Signal Processor
  • 18 DSP Filters
  • Twin Peak RTTY Filters
  • Adaptive PACTOR filters
  • USB serial interface
  • Works with all sound card modes
  • Sound card cable provided
  • Transformer isolation for sound card input and output connections

PK-232/USB
Modes

  • RTTY-Baudot
  • RTTY-ASCII
  • PACTOR
  • Packet 300 bps HF
  • Packet 1200 bps VHF
  • Morse
  • FAX HF
  • AMTOR
  • SITOR
  • NAVTEX
  • TDM
  • All the new
    Sound Card Modes!

    Timewave carries a complete line of accessories for the DSP Filter and Data controller product lines. The accessories include power supplies, cables, connectors, manuals and upgrades. Please call or email us with your requirements.

DownloadDevices

Single USB connection to computer; USB Sound Card built-in; USB Powered; Universal Rig Control built-in - logic level +/-, CI-V, CAT, & RS-232! Software Configuration - No jumpers! Mar 01, 2008 Navigator FTDI COM Port Drivers. Navigator Setup and Drivers for Windows - 2016. Signed driver set for the Timewave Navigator. Win XP, Vista, Win 7, Win 8/8.1, Win 10 (32 & 64 bit) Note: These are for the Navigator only! ExtFSK for MTTY, WinWarbler and N1MM+ Navigator Setup and Drivers for Windows - 2016.zip Nav-TW Driver 20420.zip.

Driver Downloads For Windows 7

US Dealershttp://www.timewave.com651-489-5080
Timewave Technology Inc.
Canadian Dealers
Fax 651-489-5066
International Distributors
St. Paul, MN 55103-1856 USA

Timewave Port Devices Driver Download For Windows 7

© 2007-2014 Timewave Technology, Inc. All Rights Reserved.